Product:
Innovative 7000-T Flexible Height Adjustable Laptop Arm

Date: 08/06/2014 15:01

Question:
Will this fit a Dell Latitude e6420 XFR? It weighs 10 pounds and measures 14.5"x11".

Answer:
Yes, your Dell laptop will work with this arm.

Product:
Ergotron 24-280-928 WorkFit-PD, Sit-Stand Desk (birch)

Date: 08/06/2014 14:57

Question:
To decide if it fits into the corner we currently have flanked by some low furniture: how high are the feet leading to the bottom x-shaped frame outside (floor above the frame) and inside (floor to bottom end frame) please? Are these height adjustable too? We have unfortunately a bit uneven floor here and some adjacent furniture bottom frame which we wonder if that fits either below or above it. How does the height adjustment work, is it pneumatic? Where does one adjust the height, is it reached easily from the front?

Answer:
In regards to the height adjustability, yes this table is height adjustable and has a range of 32” to 51.5”. The desk is non-electric and uses constant force technology ( pneumatic mechanism) to move the table up and down. There is a handle to the right hand side of the desk where you adjust the desk height by moving it up and down.

Product:
Standing Desk Converter, Ergotron 33-349-200 WorkFit-S Dual Monitor with Worksurface

Date: 08/05/2014 14:45

Question:
I need this unit with the laptop mount on one side.

Answer:
Please choose the LCD/Laptop conversion kit under “option 8” to be able to mount your laptop next to your monitor.

Product:
Apple Compatible Ergotron 24-414-227 WorkFit-A Sit-Stand Workstation, Silver

Date: 08/05/2014 14:36

Question:
Do I need a particular type of desk for this workstation?

Answer:
You do not need a particular desk. However we recommend that you avoid granite or glass tops. It is preferable if the table top is of some sort of wood or manufactured wood.

Product:
Ergotech 320-C14-C024 One-Touch Dual Monitor Arm

Date: 08/05/2014 14:31

Question:
Both monitors move in unison up and down the pole 14 inches. Is that correct?

Answer:
They do move in unison, but the pole is not supposed to be used for height adjustment after the arm is setup. The user sets the arm at the pole height and then leaves it there. They would need to remove it and place it at the height they want later.

Product:
Neutral Posture 8000 Series Ergonomic Executive Task Chair

Date: 08/05/2014 12:10

Question:
I need the seat height around 17 or 18 inches. What cylinder height would I choose?

Answer:
The shortest cylinder is L1 -3" cylinder and gives you 16-19" of seat height. The standard cylinder is L2 and is 4" and the seat height is between 18-22".

Product:
Evoluent VM4RB Vertical Mouse 4 Right Bluetooth Mouse, Mac only

Date: 08/05/2014 12:00

Question:
Do you also have a left Evoluent Vertical Bluetooth Mouse? Will this be recognized my a new iMac with Mavericks?

Answer:
Unfortunately there is no left bluetooth version yet. We have a left hand version of the mouse but not bluetooth enabled.

Product:
Workrite NVM-1-B Non-VESA Mount Bracket

Date: 08/05/2014 11:54

Question:
Will this mount work with a Samsung XL2370 product dimensions 22.5" x 14.4" x 1.9"?

Answer:
Yes, it will. The only other aspect that needs to be double checked is the "bezel thickness at the edge of the monitor," which cannot exceed 1 3/4".

Product:
Ergotron 45-241-026 LX Desk Mount Arm

Date: 08/05/2014 11:38

Question:
I want to use this for a monitor but may also want to occasionally mount my laptop on this arm. Should I order the laptop option? And if I do will I still get the vesa mount for my monitor? Can I order the laptop tray later separately?

Answer:
Yes, you can order the laptop tray separately. The vesa mount comes with the arm so you can either attach a monitor or the laptop tray on it.

Product:
Cotytech DM-GSDA Dual Apple Desk Mount Spring Arm

Date: 08/05/2014 11:19

Question:
I am wondering if there are vesa compliant mounts available for this. I am wanting to mount a 27" 2010 imac and a normal monitor to this arm, both would need vesa compliant mounts. If not, can you recommend an arm with vesa mounts that would support the weigh of an imac? Also, would it be possible to add an arm to this for a laptop platform?

Answer:
Cotytech DM-GSDA Dual Apple Desk Mount Spring Arm is VESA compliant: 75x75 and 100x100. You should be able to mount the 27" iMac and a normal monitor. You can purchase a triple arm unit here and a mountable laptop tray here.

Product:
Workrite Sierra HXL Crank Rectangular Height Adjustable Table

Date: 08/05/2014 09:13

Question:
Can I install a 22" track on this table?

Answer:
Crank desks can only accommodate a maximum cut track 16” in length (it does not need a spacer.) It will not accommodate a 22” track. The Sierra HXL series will accommodate your 22” track.

Product:
Ergotron 20-137-200 DS100 28" Pole

Date: 08/04/2014 10:36

Question:
I have the Ergotron 45-245-026 LX Dual Side-by-Side Arm. Is this pole threaded so that I could use it in place of the short black pole to bring the LX arms to standing height?

Answer:
Unfortunately, the diameter of the poles are different in the DS100 and LX series. Ergotron does not make a taller pole to be used with the LX Dual Side by Side Arm.

Product:
Ergotech FDM-PC-S01 Freedom Single Arm

Date: 08/04/2014 10:32

Question:
Does the Ergotech FDM-PC-S01 Freedom Arm come in a double arm model? I need it to support 2x27" monitors, weight is 9.54kgs each.

Answer:
To make it into a double arm model, you would need to purchase 2 x FDM-PC-S01. You will have spare parts but this is the only way to make this item into a dual.

Product:
Apple compatible Ergotron 24-422-227 WorkFit-A Workstation, Platinum

Date: 08/04/2014 10:22

Question:
Does the this workstation come with a grommet mount? I need to mount it to drilled holes on my desk (instead of clamp mounted).

Answer:
Yes, this unit does come with a grommet mount.

Product:
Ergotech 100-D16-B03 Triple LCD Horizontal Desk Stand with Standard Wings

Date: 08/01/2014 12:22

Question:
What is the full extended arm length? I would like to mount a 27" monitor (25.5" wide) with 2 vertical 17" monitors (12.2" wide in portrait), without the ends of the arms showing.

Answer:
52.5". Your set-up can work with this product.

Product:
Ergotech 100-D16-B03 Triple LCD Horizontal Desk Stand with Standard Wings

Date: 08/01/2014 12:21

Question:
Is one arm detachable? And would the stand be stable with only one arm attached, with a center monitor and a monitor on only one side? >

Answer:
I wouldn't recommend unscrewing the arm, that is beyond the design parameter, but it is possible.

Product:
Ergotech 100-D16-B03 Triple LCD Horizontal Desk Stand with Standard Wings

Date: 08/01/2014 12:20

Question:
Is it possible to replace the bottom with a desk clamp? And which would you recommend?

Answer:
Yes, the product is 100-C16-B03. Or you can buy the clamp separate and that part number is A00041.

Product:
Chief Dual Horizontal Grommet Mount KTG220B or KTG220S

Date: 08/01/2014 11:38

Question:
Can this mount accomodate 2 24 inch monitors (Samsung-E2420L) in the landscape position?

Answer:
Yes, your monitors will fit with KTG220 and they can go in landscape position.

Product:
Chief KONTOUR K3 Grommet Mounted 1x2 Array K3G120B or K3G120S

Date: 08/01/2014 11:32

Question:
Are the mounts' position adjustable or fixed?

Answer:
You can adjust the center head but not the top one.

Product:
Cotytech MW-M125PN Long Reach Medical Arm Wall Mount

Date: 08/01/2014 10:50

Question:
Considering the handle of this Long Reach Medical Arm, what is the maximum monitor size that would fit this model? What is the finished color of this product?

Answer:
The maximum monitor size compatible with this arm is 27" and it would need to have a VESA pattern 75x75 or 100x100. The finished product is white glossy in color.

Product:
Eldon Footrest

Date: 08/01/2014 10:28

Question:
How do you make it stop tilting?

Answer:
There is no lock on the tilting

Product:
Ergotron 24-316-026 WorkFit-A, Dual Monitor with Worksurface

Date: 08/01/2014 10:21

Question:
Do both monitors need to be the same size/weight for the WorkFit-A Dual with Worksurface? I have a 24 inch Samsung monitor and a 17 inch Dell monitor. Would I be able to rotate the smaller monitor to portrait orientation and back again? How difficult would that be?

Answer:
Both monitors do not have to be the same screen size or weight. They do however need to be in between the combined weight capacity. For this unit, the monitors must weigh between 9-20lbs combined. To rotate the monitor from landscape to portrait mode, you would need to remove a set screw in the back of the monitor. So you cannot just tilt the monitor to change from landscape to portrait, you would have to remove the set screw every time you want to change the back and forth from landscape to portrait. This screw is easy to remove and is shown in the installation manual.

Product:
Chief KONTOUR K3 Grommet Mounted 3x1/2x1 Array K3G310B or K3G310S

Date: 08/01/2014 10:03

Question:
Does this monitor mount support 27" monitors in (landscape landscape landscape) orientation as well as in (portrait portrait portrait) orientation? If so, what clearance remains from the desktop to the bottom of the monitor, when in either orientation? (I ask because I have a center channel speaker that's ~7 inches tall, and would prefer to have the monitors sit above the speaker when in portrait or landscape mode.)

Answer:
This mount does support 27” monitors in landscape x3 or portrait x3 orientation. The height to the monitor bracket is 18.29” (middle of mounted monitor). If your monitors dimensions are 27” wide, there will be clearance of 4.79” below the monitors in portrait orientation.

Product:
Ergotron 60-612 Neo-Flex Tilting Wall Mount, UHD

Date: 07/31/2014 15:06

Question:
Is this all I will need to hang my SONY KDL55W800B TV? Are their any other extra accessories I will need to hang my TV on the wall with this mount?

Answer:
Everything you need to hang your TV on the wall is included with this mount. Your SONY KDL55W800B TV has a Mount Bracket/VESA Pattern of 300mm x 300mm that fits within the range of this Wall Mount.

Product:
SIS Xtreme Crank Rectangle Single Surface Height Adjustable Table and Ergonomic Desk

Date: 07/30/2014 13:13

Question:
Are these tables delivered already pre-assembled?

Answer:
The desk arrives unassembled in a flat box. The column and base pieces are in one box and the top desk piece is in another box. They are fairly flat boxes.